HOW TO GET MORE WATTS OUT OF CB RADIO
The power of CB radios can increase the power of the CB radio we should turn it up if you don’t have any tools, any equipment but just a CB Radio and want more power you should add modulation on the radio.
HOW TO INCREASE ITS POWER
First of all, we have to open the CB radio from the bottom where is the mic of the speaker and then gonna open it and turn off the radio if connected you can clearly see that there are some screws at the left bottom of the radio you need to take it out by the help of Screwdriver, and then open the box but carefully because there is a speaker connected right there with the wires people who want to broke it and put it in seven.
After this step, we have to find the modulation part that says a number when you see the part very next to vx4 the white part then what we are going to do is just open it with the flat screwdriver or Philips small one.
Secondly starts turning the modulation part counterclockwise up to the end and then our radio will be ready to give the exact output that we want from it, off course, some power will increase assemble all the parts correctly as mentioned above, and turn on the radio for exact results.
DOES CB RADIO IMPROVES WITH INCREASING THE WATTAGE :
A citizen’s band or CB radio is a public and personal two-way radio service. Its frequency band has 40 channels used in public transmission with a frequency of 27 MHz. These frequencies are used to send and receive on every channel.
Increasing wattage improves overall performance. After reaching a maximum of 4 watts, several methods are available for increasing the power and reception of the radio. Choose a good location, install an antenna, use an SWR meter, and boost the signal with an amplifier, among other things.
SOME PRO TIPS TO INCREASE ITS WATTAGE :
- Add the SW meter, and install the good antenna.
- Invest in the amplifier.
- Use the radio’s manual squelch.