How To Mount CB Antenna~Explained In Detail (2023)

It is so easy to buy any antenna within a minute or few hours as it gets popular in stores whether it is online or onsite the store. But the point is that Tigger How To Mount Cb Antenna in the vehicle.

Does this ever happen to you? like you buy an antenna for your car or truck or any vehicle and don’t know how to install it? looking confusedly at the antenna and taking out your phone and typing how to mount the CB antenna? Many articles pop up and still, you could not figure out how to mount it while wasting plenty of hours. Then stop! Your research has now reached your goal. Today we will discuss in detail how to mount a CB antenna so don’t go away and continue with our journey.

09 Basics Requirement To Mount CB Antenna:

How To Mount CB Antenna

Come on pick up a notebook and pen then note down the requirements for mounting it:

  1. Bracket rugged ridge jk antenna mount or any other you like.
  2. Screws extended links bolts, nuts (so239 )
  3. 17 milli meter wrenches
  4. 11 milli meter wrenches for antenna
  5. 13 milli meter for socket extensions ratchet
  6. Ground antenna bracket (properly grounded)
  7. Antenna coax cable
  8. Mast (metal pole)
  9. SWR meter or radio which consists of SWR readings

Let’s Go Through The Process Of How To Mount Cb Antenna:

There are easy processes for mounting your CB antenna:

Step# 01: Gather all the requirements:

One of the most important steps is to gather all the requirements to mount the antenna. Second, to have an exact antenna you are going to mount it with the exact size of brackets to ground it properly on the vehicles.

Step# 02: Finding the perfect location:

After gathering all the basic requirements find the perfect spot to mount it. We have three basic guides to mounting the antenna in the perfect spot:

  1. Front of the vehicle ( most popular)
  2. middle of the vehicle ( ideal spot)
  3. Back of the vehicle (good spot)
handheld cb radio

Step# 03: Attaching the brackets:

The third step is to attach the brackets. For the front area use bolts and screws to attach it. For the middle area, it required a toolbox to attach the brackets and mast, and for the back side, it simply attached in the same way as the front area brackets are attached.

Step# 04: Using the toolbox mast to attach the metal pole:

Before wiring the coaxial cable it is necessary to attach the mast metal pole brackets to the vehicle for antenna support by using the toolbox.

Step# 05: Wiring the Coax Cable:

Pick up the mount of your choice and it gets a so239 nut which screws coax into the bottom of the mast. Place mount between metal and plastic washers of so239 nut( plastic metal and nut arranges are important)

Screw the coax cable at the bottom of the so239 nut and the antenna screws above the so239 nut.

Step# 06: Grounding the antenna:

After arranging the mount properly, it’s time to attach the mount to the brackets and the mast so that it can be ground properly. Ground the base to the antenna and then to the vehicle.

Step# 07: Checking and testing:

At the end check the antenna with the SWR meter while arranging the size of the antenna. And it’s done.

Do and Donts:

  1. Don’t buy any random brackets. Buy accurate size brackets that fit your antenna mount.
  2. Place the antenna where its tip is above the roof of the vehicle as it can radiate more frequency.
  3. Do not size your antenna without checking the reading in the SWR meter
  4. While wiring the coax wire keep an eye on the positive and negative side of the wire in the mount.
  5. Place metal and plastic washers in accurate positions.
  6. Ground the antenna properly or else it can not work as it needs to.

Frequently Asked Questions:

How should a CB antenna be mounted?

Cb antenna should be mounted at the roof of the vehicle as it is a good spot to render signal transmission with vast frequencies and ranges.

Does a CB antenna mount need to be grounded?

Cb antenna mount is important to be grounded on the solid surface of the vehicle. Without grounding properly it can make a difference in frequencies.

Can I ground my CB antenna to the battery?

The ground wire helps get rid of loud noises in a car radio. It can be connected to the battery or to any metal part of the car that’s connected to the frame. This helps make sure the radio works well and doesn’t make too much noise.

What is the max height for a CB antenna?

If you have a special radio station, you can’t put the long stick that sends out the signal higher than 60 feet from the ground. If you put the stick on a building or tree, it can only be 20 feet higher than the building or tree.

Summary:

It is so easy to buy any antenna within a minute or few hours as it gets popular in stores whether it is online or onsite the store. But the point is that Tigger How To Mount Cb Antenna in the vehicle. One of the most important steps is to gather all the requirements to mount the antenna. Second, to have an exact antenna you are going to mount it with the exact size of brackets to ground it properly on the vehicles.

The third step is to attach the brackets. For the front area use bolts and screws to attach it. For the middle area, it required a toolbox to attach the brackets and mast, and for the back side, it simply attached in the same way as the front area brackets are attached. Pick up the mount of your choice and it gets a so239 nut which screws coax into the bottom of the mast. Place mount between metal and plastic washers of so239 nut( plastic metal and nut arranges are important)

Place the antenna where its tip is above the roof of the vehicle as it can radiate more frequency. Do not size your antenna without checking the reading in the SWR meter. While wiring the coax wire keep an eye on the positive and negative sides of the wire in the mount. Place metal and plastic washers in accurate positions. Ground the antenna properly or else it can not work as it needs to.

for further information please visit 🙂

https://thecbradio.com/

Leave a Comment